Tomsk chart guide
Tomsk Schumann resonance chart: live view and how to read it
The Tomsk chart is the most shared Schumann resonance image online. It comes from the Space Observing System at Tomsk State University in Siberia, and people often find it by searching for "sos70". Below is the latest view from EarthWave's feed, followed by how to read the original chart without the usual mistakes.
The station’s sonogram
How to read this chart
Time
Read from left to right
Read the date and hour labels first. The original station image keeps its printed time labels; it does not automatically switch to your local time.
Where the Tomsk chart comes from
Tomsk State University runs an extremely-low-frequency (ELF) observatory in western Siberia, far from large cities and power lines. It has recorded the Schumann resonances continuously for years and publishes the charts on its Space Observing System site, sos70.ru.
EarthWave reads the Tomsk charts every hour, extracts the first-mode frequency (F1), amplitude and Q-factor, and shows each value with its UTC time, so you do not have to convert time zones or guess the scale from colours.
Tomsk time is UTC+7
The time axis on the original charts is Tomsk local time, which is UTC+7 all year; Russia does not use daylight saving time. The right edge of the chart is the most recent hour.
To convert, subtract 7 hours for UTC. 14:00 in Tomsk is 07:00 UTC, 08:00 in Central Europe in winter (09:00 in summer) and 02:00 in New York in winter. A chart shared at "midday" may show the night before where you live.
Reading the spectrogram
The main Tomsk image is a spectrogram covering about three days. Dates run along the top, hours along the bottom, and the vertical axis is frequency in hertz. The horizontal bands are the resonance modes: the strongest near 7.8 Hz, then near 14, 20, 26 and 33 Hz.
Colour shows signal strength, not frequency. Blue means low intensity, green is typical, and white is high. A band turning white means more power in that mode; it does not mean the frequency rose.
White bursts, dark gaps and vertical lines
White patches or columns that cover many frequencies at once are strong broadband bursts. They usually come from nearby thunderstorms, local electrical interference or processing artefacts, not from a jump in Earth's frequency. They often appear in the afternoon and evening, when thunderstorm activity peaks.
Dark or blank stretches can mean missing data, an outage or a very quiet signal; the colour alone cannot tell you which. Thin vertical lines across the whole chart are short events at a single moment, typically local. Check the timestamps before calling any of these a global event.
The frequency, amplitude and Q-factor graphs
Next to the spectrogram, Tomsk publishes line graphs for the frequency, amplitude and Q-factor of the first resonance modes. The frequency graph shows where each peak sits, the amplitude graph shows how strong it is, and the Q-factor graph shows how sharp it is.
These are the numbers EarthWave tracks as F1, Amp F1 and Q F1. Read them together: amplitude can rise sharply while frequency barely moves, which is the normal response to strong lightning activity.
When Tomsk is offline
The Tomsk station sometimes goes offline for maintenance, power or network problems, and the site may keep showing an old image. Always check the date on the chart before sharing it as "today".
When EarthWave has had no Tomsk reading for six hours, it switches to the Italian stations: the Etna magnetic-field station in Sicily and the Cumiana electric-field station near Turin. They use different sensors and colour scales and follow the second resonance near 14.3 Hz, so their images look different from Tomsk even when conditions are the same.
Source & methodology
Take it with you
Follow live resonance activity in the EarthWave app
Use the mobile app for live readings, activity context, and optional premium history on iOS and Android.